Precision Metal Stamping Parts Polished Stainless Steel Motor
Stainless steel support stamping parts are stamped a plate socket
and bended a clip in strip , bended upper section to fix or secure
support stamping part on object and supporting socket with flat
panel is used to support something of motor .
Support stamping parts are made of high tensile strength stainless
steel 18-8 that with good performance or properties .
Tensile strength σb (MPa)
Yield Strength σs (MPa)
Elongation δ5 (%)
Reduction of area ψ (%)
Mechanical property of support stamping parts
1398 to 1454
Specific heat capacity(0~100℃,KJ·kg-1K-1)
Thermal performance of support stamping parts
Electrical performance of support stamping parts
Length : 25 mm
Width : 25 mm
Height : 15 mm
Thickness : 0.8 mm
Chamfer : 0.5 x 45°
Note : we accept customized sizes from 0.5 mm to 5 m for different
+/-0.1 mm for normal sizes , and refer to following tolerances
standard for unspecified sizes .
Stainless steel support stamping parts for motor have high tensile
strength and good performance to meet continuous high-load working
◆ High tensile strength
Tensile strength is up to 535 σb (MPa) and more higher after heat
◆ Perfect elongation
50 δ5 (%) to ensure support stamping parts have enough elongation
under heavy load and pressure . .
◆ Hard material
Support stamping parts are made of stainless steel 18-8 that
hardness is HRC 72 or so .
◆ Resistance to corrosion
Stainless steel 18-8 with good performance on anti-corrosion by
itself . normally , not to be rusted in 5 years inside conditions .
Its nearly no magnet for stainless steel 18-8 support stamping
Polishing for support stamping parts